UAS Technician and Pilot
- Quick Apply
We’re looking for a UAV hardware engineer who can build, repair, and fly drones.
You’ll assemble drones, integrate payloads, flash firmware, and configure systems.
You should be comfortable following build instructions as well as figuring out how an existing drone works.
You’ll fly the drones yourself and handle troubleshooting and repairs, including in the field.
You’ll also assemble simple electronic devices for other applications.
For example, you might install a single-board computer in an enclosure, add basic moisture protection, and connect it to an onboard battery.
These projects draw on the same skills as an FPV drone build: soldering, working with power systems, fitting components into enclosures, and keeping wiring neat.
You’ll work closely with a team of experienced embedded engineers.
This is primarily a hands-on hardware role, with less emphasis on programming.
Business travel and organizing and running field demonstrations are part of the job.
Requirements Experience building an FPV drone yourself using off-the-shelf components: frame, motors, ESC, FC, VTX, receiver, and camera.
Experience flashing and configuring flight controller firmware (Betaflight / INAV), including port configuration, flight modes, failsafe settings, and tuning.
Confident FPV flying in acro mode.
Ability to diagnose problems and repair a drone after a crash, including in the field.
Basic knowledge of drone radio links, including control links (ELRS, Crossfire, etc.), video links (analog/digital), and frequency bands.
Experience soldering wires and connectors, soldering to SMD pads on FC/ESC boards, and assembling and repairing simple PCBs.
Experience using a multimeter, component tester, and other measuring instruments.
Understanding of power systems, including batteries, ESCs, BEC/DC-DC converters, current, wire gauges, and power connectors.
Knowledge of safe LiPo/Li-ion battery handling, including charging, balancing, storage, transport, and disposal of damaged cells.
Familiarity with connecting and troubleshooting peripherals using interfaces such as UART, RS485, I2C, CAN, and Ethernet, along with reading pinouts and datasheets.
A willingness to learn these skills is also acceptable.
Ability to mount payloads and simple devices and fit them into enclosures.
Understanding of vibration isolation for flight controllers, cameras, and payloads.
EASA drone pilot certificate (A1/A3, A2 CofC), or willingness to obtain one.
English C1+ Nice to Have Experience with ArduPilot / PX4 and an understanding of MAVLink.
Experience building other types of drones, including 7-inch and larger drones and ArduPilot multirotors.
Experience with fixed-wing drones.
Experience as a UAV operator or technician.
- 3D modeling skills for FDM printing using Fusion 360, SolidWorks, or similar software.
Experience operating a 3D printer, including preparing models, slicing, and printing.
Experience protecting circuit boards from moisture with conformal coating and working with thermal management.
Experience using an oscilloscope, logic analyzer, and bench power supply.
Experience flashing microcontrollers using a programmer (ST-Link, USB-UART, etc.).
Basic Linux skills, including SSH and working with single-board computers.
Basic Python or C skills.
Driver’s license.
About Sky Spy Sky Spy is a fast-growing dual-use startup developing next-generation RF intelligence solutions for contested environments.
We are backed by leading European VCs, combat veterans, and technologists.
Our mission is to deliver intelligence that saves lives and empowers allied forces worldwide.
What We Offer Above-market salary.
Company equity package.
Dynamic and flexible work schedule.
The opportunity to contribute directly to meaningful technology that protects lives.
Powered by JazzHR