Talent.com
Diese Stelle ist in deinem Land nicht verfügbar.
Test Development Engineer

Test Development Engineer

Design Consulting GmbHIngolstadt, Bavaria, Germany
Vor 8 Tagen
Stellenbeschreibung

We are looking for an Engineer for AKTUALISIERUNG AND TEST ACTIVITIES ON THE VEHICLES on site in Ingolstadt of an Automotive Premium

Specifications

  • Knowledge of working model of AUDI and / or VW is nice to have;
  • Advanced knowledge in diagnostic tools;
  • General knowledge on 2D drawings and logical schematic;
  • General knowledge on LIN, CAN, Flexray and optical network;
  • General knowledge on laboratory tools (scope, tester,…)
  • German (at least B2 Niveau) and English language is MANDATORY;
  • Expertise on the activity is MANDATORY;
  • European Driving Licence B is Mandatory
  • Prototyping Driving Licence Cat. C is nice to have

Expected activities and deliverables can be resumed as follows :

  • Update
  • The current hardware (HW) / software (SW) status of the vehicle must be recorded and compared with the specifications.
  • Total FSP (input) must be stored in the AVx (Workbench) to the vehicle
  • The HW parts (vehicle-related components) provided and listed in the AVx must be replaced
  • In the event of deviations from the HW status to the VR, feedback must be given to the client and documented in AVx vehicle-related.
  • The old HW goes back to the client
  • The immobilizer and the component protection are to be learned at FAZIT and functions on demand at Krypto.
  • The SW updates according to current VR (composite release) or separate network specifications (e.g. pre-integration statuses – called sprint) are to be carried out with iDEX / ODIS or developer tools
  • The ECUs must be coded and parameterized using the CP tool.
  • In the event of deviations from the specification calculated in the CP tool, feedback must be given to the customer and documented in AVx vehicle-related.
  • Measurement
  • Installation of the holding devices for the measuring technology (if necessary)
  • Installation of the measurement technology
  • Post-cabling BUS taps
  • Connection of the measurement technology to the vehicle systems
  • Commissioning of measurement technology
  • Perform a functional test
  • Expansion of measurement technology and return to the client.
  • Start Up (Inbetriebenahme)
  • Sensors and actuators must be trained accordingly.
  • Error memory entries in the ECUs must be analyzed and, if possible, corrected.
  • Calibration of THE FAS systems and headlamps shall be carried out.
  • Functions of the vehicle must be checked and documented by checkIT at the end of commissioning.
  • The current HW / SW status of the vehicle (FSP initial state) must be recorded and stored in the AVx (Workbench) for the vehicle.
  • Test
  • The vehicle may be moved by the contractor on public roads if there is no secrecy for the vehicle.
  • Traces must taken using CANOE and VECTOR tools.
  • Rework